[Previous Page] [Next Page] [Up] [Home Page]

[Home Page]

Front-End Engineering Services

DHEE Technologies
CONTACT: +91.80.26692527
PHONE: +91.9448617328
E-MAIL: sales@dheetech.co.in
ADDRESS: #32, 9th Cross BSK 3 Stage
Bangalore 560085 Karnataka, India
* Front-End Engineering Services
* Printed Circuit Design & Layout Services
* Printed Circuit Design & Engineering Schools / PCB Technical Training / Tutorials
We are one of the specialized CAD & CAM house based in Bangalore, (known as Silicon Valley of India) with experienced engineers to cater to all your requirements. We are highly dedicated, competent individuals with more than 10 years of average field experience. Our world-class team of engineers, equipped with proven proprietary software and associated applications, perform the best in class Engineering Services.
We create schematic diagrams, create component library, placement of components, physical design, perform analysis on the design data to validate the design for all EMI/EMC/ Impedance & other requirements. With thorough PCB manufacturing & assembly knowledge our designers have the capability to visualize the intricacy that have to be followed to make a product pass thru the production lines without wasting critical man hours in any of the production centers.
We provide following services:
* CAD / CAM software training
* PCB CAD designing
* Scripting & automation for CAD & CAM
* CAM services
* PCB stack-up & Route card preparation
* EzCAM software sales & support

Elgris Technologies, Inc.
CONTACT: Igor Luvishis
PHONE: +1.707.237.2794
FAX: +1.707.573.0237
E-MAIL: sales@elgris.com
ADDRESS: 465 Stony Point Road, #236
Santa Rosa, California 95401 USA
CATEGORIES: Data Conversion Services, Front-End Engineering Services
Elgris provides high quality schematics and symbol libraries conversion services between various EDA platforms (Cadence, Mentor, Zuken, Altium, EDIF, etc.). Elgris schematic conversion services come with a guarantee Elgris guarantees 100% netlist conversion on all services it performs. Elgris provides schematic conversion services between:
* Altium PCAD
* Altium Designer
* Cadence OrCAD
* Cadence ConceptHDL
* Mentor PADS Powerlogic
* Mentor DxDesigner
* Mentor DesignCapture
* Mentor Design Architect
* Zuken Cadstar
* EDIF200
* EDIF300
and other formats

EverythingPCB Data Conversion Services
PHONE: 408.799.8900
Danny (at) EverythingPCB.com
ADDRESS: San Jose, California 95136 USA
CATEGORIES: Data Conversion Services, Front-End Engineering Services
We've been in the PCB Industry since 1973. We've seen it all and done it all.
From minor to major Gerber edits to merging several PCB's together to save fabrication costs to full blown tooling to converting CAD data we are your best choice.
Click here for more information on our services and see a full list of the data formats we work with.

Gray PCB Services
CONTACT: James Gray
PHONE: 850.217.0520
E-MAIL: jim@graypcbservices.com
ADDRESS: 7357 Westminster Dr.
Navarre, Florida 32566 USA
* Artwork Scanning Services
* Data Conversion Services
* Photoplotting/Photomasks - Services
* Front-End Engineering Services
* Printed Circuit Board Manufacturers
Scanning Services - Gray PCB Services can capture an intelligent database from your artwork - film, paper drawings and even bare boards.
Database Conversions - Gray PCB Services can support many types of design format conversions, providing the customer a database with intelligent symbols and connectivity. Also dxf and dwg files can be converted to a gerber file database.
Photoplotting Services - Gray PCB Services can provide you with photoplots from your gerber data. Upon request, plot files recieved by 2pm CST can ship the same day for next day delivery.
Printed Circuit Board Manufacturing - If your looking for someone to manufacture your pc boards, Gray PCB Services can provide you with that as well.

PCB Planet Limited
CONTACT: Sapan Chokshi
PHONE: +917923287127
E-MAIL: info@pcbplanet.com
ADDRESS: B-9, GIDC, Electronic Estate, Sector-25
Gandhinagar - 382044, Gujarat, India.
CATEGORIES: Front End Engineering Services
PCB Planet provides complete Front End Engineering services to the PCB Manufacturing industry. We have the latest technology and dynamic workforce to provide the best possible services to our customers.
We offer KPO (Knowledge Process Outsourcing) engineering services for PCB industry. We provide services to a number of customers in Europe, USA and Asia-Pacific.

TRI-C Design, Inc.
CONTACT: Keith Hildahl
PHONE: 507.663.1745
FAX: 507.663.1186
E-MAIL: info@tri-cdesign.com
ADDRESS: 105 East 4th Street, Suite 205
Northfield Minnesota 55057 USA
CATEGORIES: CAD/CAM, Front-End Engineering Services
TRI-C Design, Inc. is a leader in computer aided design, panelization and automation for flexible and printed circuit board manufacturers.
Born in the flex circuit area 15 years ago and grew into hardboard and automation.
We also offer data conversion services, printed circuit design and layout and programming services.
See our website for details.

Unisoft Corporation
CONTACT: Richard Larue
PHONE: International 203.913.0782 / Toll Free: 888-486-4246
FAX: 203.567.8050
E-MAIL: info@unisoft-cim.com
ADDRESS: 554 Boston Post Rd #112
Orange, Connecticut 06477 USA
* Data Conversion Services
* Front-End Engineering Services
* Assembly / Planning / Manufacturing / Shop Floor Automation Software
* Demo, Shareware, Freeware & Trial Offer Software
* Gerber Editors / Viewers, ODB++ Viewers, Data Conversion / Translation Software
* Pre-production CAM and Engineering Software
* Quoting, Order Entry, Tracking Software
* Reverse Engineering Software
For over 30 years the Unisoft OneFACTORY software suite ( http://www.unisoft-cim.com ) has been used to automate Electronics Manufacturers (EMS/CEM & OEM). Purchase only the software you require now and add modules as your needs grow.
Electronics manufacturing is a high tech environment where every lost minute of output can incur considerable financial cost. Unisoft OneFACTORY serves to quickly setup Pick & Place Assembly equipment, AOI Optical Inspection machines, ATE Test and Selective Solder equipment, etc. for fast pre-production setup. Process assembly sheet documentation and kitting labels are quickly created, aids assembly, first piece inspection, general inspection, fast quotations and cost estimation report, repair/rework, debug, etc.
Also a PC Board viewer from CAD and Gerber is available for use for your assembly department, general inspection, test departments, repair & rework areas, design group, etc. Aids PCB troubleshooting technicians to find components, pins, finds shorted traces, schematic hot linked to the assembly, etc. Distribute the viewer to vendors & customers for better communications.
CAD to CAD and CAD to Machine software and services for translation and data conversion is available. Also Gerber reverse engineering, etc. allows unintelligent data to be translated into smart data CAD files and machine programs.
In addition Unisoft offers the CELLS WORKFLOW Manufacturing Execution System (MES) software which is straight forward simple to setup yet powerful product and job tracking software for fast New Product Introduction (NPI) for electronics manufacturers. CELLS WORKFLOW is also available for other industries such as medical, chemicals, aerospace, pharmaceuticals, foods and textiles. The CELLS WORKFLOW (MES) software provides product and job tracking with traceability for regulatory compliance.
For more information and to download the free trial software go to http://www.unisoft-cim.com or phone 888-486-4246.

Web www.everythingpcb.com

[Previous]  [Next]  [Up]  [Home]