[Previous Page] [Next Page] [Up] [Home Page]

Pre-production CAM and Engineering Software

Also see: Gerber Editors / Viewers, ODB++ Viewers, Data Conversion / Translation Software

Frontline PCB Solutions Ltd.
PHONE: 972.8.9322183
FAX: 972.8.9322186
E-MAIL: info@frontline-pcb.com
ADDRESS: 2 Openheimer St.
Rehovot 76701, Israel
CATEGORIES: Pre-production CAM and Engineering Software
Frontline PCB Solutions is a Mentor Graphics - Orbotech Company, and a leading global provider of pre-production CAM and engineering software solutions for the PCB industry. Frontline has the largest install-base of field-proven front-end solutions in the world with over 7,500 seats worldwide, and is committed to delivering cutting-edge products that increase yield and reduce pre-production costs. Frontline provides a unified data format for all pre-production stages, a true open system approach and seamless data integrity. Frontline products are distributed by Orbotech. Frontline’s CAM & Engineering products are part of Mentor Graphics’ PCB Systems Design-through-Manufacturing Support.

E-MAIL: info@ucamco.com
ADDRESS: Bijenstraat 19
9051 Gent, Belgium
BTW / VAT be 0475 099 268
CATEGORIES: Pre-production CAM and Engineering Software
We have more than 5000 CAM systems installed around the world with local support in every major market. Our customers include the leading PCB fabricators across the global spectrum. Many of them have been with us for more than 20 years. Major AOI, direct imaging and electrical test equipment vendors OEM Ucamco software as front-end to their systems.
Key to this success has been our uncompromising pursuit of engineering excellence in all our products. For 25 years our product goals have been best-in-class performance, long-term reliability, and continuous development to keep each user at the cutting-edge of his chosen technology.

Unisoft Corporation
CONTACT: Richard Larue
PHONE: International 203.913.0782 / Toll Free: 888-486-4246
FAX: 203.567.8050
E-MAIL: info@unisoft-cim.com
ADDRESS: 554 Boston Post Rd #112
Orange, Connecticut 06477
* Data Conversion Services
* Front-End Engineering Services
* Assembly / Planning / Manufacturing / Shop Floor Automation Software
* Demo, Shareware, Freeware & Trial Offer Software
* Gerber Editors / Viewers, ODB++ Viewers, Data Conversion / Translation Software
* Pre-production CAM and Engineering Software
* Quoting, Order Entry, Tracking Software
* Reverse Engineering Software
For over 30 years the Unisoft OneFACTORY software suite ( http://www.unisoft-cim.com ) has been used to automate Electronics Manufacturers (EMS/CEM & OEM). Purchase only the software you require now and add modules as your needs grow.

Electronics manufacturing is a high tech environment where every lost minute of output can incur considerable financial cost. Unisoft OneFACTORY serves to quickly setup Pick & Place Assembly equipment, AOI Optical Inspection machines, ATE Test and Selective Solder equipment, etc. for fast pre-production setup. Process assembly sheet documentation and kitting labels are quickly created, aids assembly, first piece inspection, general inspection, fast quotations and cost estimation report, repair/rework, debug, etc.

Also a PC Board viewer from CAD and Gerber is available for use for your assembly department, general inspection, test departments, repair & rework areas, design group, etc. Aids PCB troubleshooting technicians to find components, pins, finds shorted traces, schematic hot linked to the assembly, etc. Distribute the viewer to vendors & customers for better communications.

CAD to CAD and CAD to Machine software and services for translation and data conversion is available. Also Gerber reverse engineering, etc. allows unintelligent data to be translated into smart data CAD files and machine programs.

In addition Unisoft offers the CELLS WORKFLOW Manufacturing Execution System (MES) software which is straight forward simple to setup yet powerful product and job tracking software for fast New Product Introduction (NPI) for electronics manufacturers. CELLS WORKFLOW is also available for other industries such as medical, chemicals, aerospace, pharmaceuticals, foods and textiles. The CELLS WORKFLOW (MES) software provides product and job tracking with traceability for regulatory compliance.

For more information and to download the free trial software go to http://www.unisoft-cim.com or phone 888-486-4246.

Web www.everythingpcb.com

[Previous]  [Next]  [Up]  [Home]