[Previous Page] [Next Page] [Up] [Home Page]

Need PCBs in a rush ? We offer 24 hrs turn for up to 8 layers.

[Home Page]

Printed Circuit Board Registration Equipment

Also see:
Registration Pins

DIS Inc. Duetto Integrated Systems Inc.
CONTACT: General Support
PHONE: +1.631.851.0102
FAX: +1.631.967.1540
E-MAIL: support@distechnology.com
ADDRESS: 85 Hoffman Lane Suite Q
Islandia, New York 11749 USA
CATEGORIES: Printed Circuit Board Registration Equipment
DIS is an equipment builder that is dedicated to building PC board registration equipment. This is not just the focus of our business; it is our only business.
DIS was founded because we saw the direction that the PC board industry was going and recognized the limitations of building multi-layer boards on pins.
With the goal of designing and building a system that would be more accurate, the first ideas were sketched out and tried. It started by eliminating the mechanical
tolerances inherent in pin lamination. Cameras would be used like a post etch punching system however, instead of punching slots, the cores would be sequential clamped in place.
The next step was to design a method to keep the cores in alignment during handling and in the lamination press. After reviewing all options, heat bonding was chosen as the best method.
The machine was called the PRS-77, which stood for “Pinless Registration System.

XACT and XACT Consultancy
CONTACT: Sales / Support
PHONE: +44 (0)191.257.3548
E-MAIL: info@xactpcb.com
ADDRESS: Saville Exchange
Howard Street, North Shields
Tyne & Wear, NE30 1SE UK
CATEGORIES: Printed Circuit Board Registration Equipment
The world's leading provider of factory integrated Printed Circuit Board registration solutions.
Our systems have been conceived and developed by PCB engineers for use by PCB engineers enabling the control and management of the entire PCB registration process.

Web www.everythingpcb.com

[Previous]  [Next]  [Up]  [Home]